Publications

S. Spiegel, E. Wyckoff, J. Barolo, A. Lee, E. Farcas, J. Godino, K. Patrick, K. J. Loh, and S. Gombatto, 2024, "Motion Tape Strain During Trunk Muscle Engagement in Young, Healthy Participants," Sensors, 24(21): 6933. DOI: 10.3390/s24216933

A. Lee, P. Dionicio, E. Farcas, J. Godino, K. Patrick, E. Wyckoff, K. Loh, and S. Gombatto, 2024, “Physical Therapist Acceptance of a Wearable Fabric-based Sensor System (Motion Tape) for Use in Clinical Practice: A Qualitative Focus Group Study,” JMIR Human Factors (2292-9495), JMIR, 11: e55246 . DOI: 10.2196/55246 

A. Lee, E. Wyckoff, E. Farcas, J. Godino, K. Patrick, S. Spiegel, R. Yu, A. Kumar, K. J. Loh, and S. Gombatto, 2024, “Preliminary Validity and Acceptability of Motion Tape for Measuring Low Back Movement: Mixed Methods Study,” JMIR Rehabilitation and Assistive Technologies (2369-2529), JMIR, 11: e57953. DOI: 10.2196/57953 

Y. Park and K. J. Loh, 2023, “Surface Morphing Control of Mechanical Metamaterials using Geometrical Imperfections," Journal of Materials Science (0022-2461), Springer, Online First. DOI: 10.1007/s10853-023-08872-y 

A. Vahabzadeh-Hagh, B. P. Marsh-Armstrong, S. H. Patel, L. Lindenmuth, Z. Feng, R. Gong, Y-A. Lin, T. Pierce, and K. J. Loh, 2023, “Endotracheal Tube Forces Exerted on the Larynx and a Novel Support Device to Reduce it,” Laryngoscope Investigative Otolaryngology (2378-8038), Wiley, Online First. DOI: 10.1002/lio2.1118 

S. Laflamme, F. Ubertini, A. Di Matteo, A. Pirrotta, M. Perry, Y. Fu, J. Li, H. Wang, T. Hoang, B. Glisic, L. J. Bond, M. Pereira, Y. Shu, K. J. Loh, Y. Wang, S. Ding, X. Wang, B. Han, Y. Goldfeld, D. Ryu, R. Napolitano, F. Moreu, G. Giardina, and P. Milillo, 2023, “Roadmap on Measurement Technologies for Next Generation Structural Health Monitoring Systems,” Measurement Science and Technology (1361-650), IOP, 34: 093001. DOI: 10.1088/1361-6501/acd135 

S. Quqa, L. Landi, and K. J. Loh, 2023, “Crack Identification using Electrical Impedance Tomography and Transfer Learning,” Computer-Aided Civil and Infrastructure Engineering (1467-8667), Wiley, 38: 2426-2442. DOI: 10.1111/mice.13043

S. Quqa, Y. Shu, L. Landi, and K. J. Loh, 2023, “Crack Identification using Smart Paint and Machine Learning,” Structural Health Monitoring (1475-9217), Sage, 1-17, Online First. DOI: 10.1177/14759217231167823 

Y. Shu, S. Mukherjee, T. Chang, A. Gilmore, J. W. Tringe, D. M. Stobbe, and K. J. Loh, 2022, “Multi-Defect Detection in Additively Manufactured Lattice Structures Using 3D Electrical Resistance Tomography,” Sensors (1424-8220), MDPI, 22(230): 9167. DOI: 10.3390/s22239167 

Y-A. Lin, Y. Mhaskar, A. Silder, P. H. Sessoms, J. J. Fraser, and K. J. Loh, 2022, “Muscle Engagement Monitoring using Self-Adhesive Elastic Nanocomposite Fabrics,” Sensors (1424-8220), MDPI, 22(18): 6768. DOI: 10.3390/s22186768 

K. Taneja, X. He, X. Zhao, Y-A. Lin, K. J. Loh, and J. S. Chen, 2022, “A Feature-Encoded Physics-Informed Parameter Identification Neural Network for Musculoskeletal Systems,” Journal of Biomechanical Engineering (0148-0731), ASME, 144(12): 121006/1-16. DOI: 10.1115/1.4055238 

H-J. Lee, J. Mancini, I. Joshipura, C. M. Spadaccini, and K. J. Loh, 2022, “Selective Heating through Y-Junction Waveguide Designed by Acoustic Shape Optimization,” Advanced Engineering Materials (1527-2648), Wiley, 2200756. DOI: 10.1002/adem.202200756 

W-H. Chen, W. Hseuh, K. J. Loh, and C-H. Loh, 2022, “Damage Evaluation of Seismic Response of Structure Through Time-Frequency Analysis Technique,” Structural Monitoring and Maintenance (2288-6605), Techno-Press, 9(2): 107-127. DOI: 10.12989/smm.2022.9.2.107 

L. Wang, W-H. Chiang, and K. J. Loh, 2022, “Topological Design of Strain Sensing Nanocomposites,” Scientific Reports (2045-2322), Nature, 12: 9179. DOI: 10.1038/s41598-022-13393-w 

S. Quqa, Y. Shu, S. Li, and K. J. Loh, 2022, “Pressure Mapping using Nanocomposite-Enhanced Foam and Machine Learning,” Frontiers in Materials (2296-8016), Frontiers, 9:862796. DOI: 10.3389/fmats.2022.862796 

Y-A. Lin, E. Noble, C-H. Loh, and K. J. Loh, 2022, “Respiration Monitoring using a Motion Tape Chest Band and Portable Wireless Sensing Node,” Journal of Commercial Biotechnology (1462-8732), Commercial Biotechnology, 27(1): 32-37. DOI: 10.5912/jcb1026 

M. Funderburk, Y. Park, A. Netchaev, and K. J. Loh, 2022, “Piezoelectric Rod Sensors for Scour Detection and Vortex-induced Vibration Monitoring,” Structural Health Monitoring (1475-9217), Sage, 21(3): 1031-1045. DOI: 10.1177/14759217211018821

Y. Zhao Dubuc, B. Mazzone, A. J. Yoder, E. Russell-Esposito, T. H. Kang, K. J. Loh, and S. Farrokhi, 2022, “Ankle Sprain Bracing Solutions and Future Design Considerations for Civilian and Military Use,” Expert Review of Medical Devices (1743-4440), Taylor Francis. DOI: 10.1080/17434440.2022.2039622 

M. L. Funderburk and K. J. Loh, 2022, “Passive Multi-Degree-of-Freedom Piezoelectric Rods for Continuous Monitoring of Scour Holes,” IEEE Sensors Letters (2475-1472), IEEE. DOI: 10.1109/LSENS.2022.3146794 

M. L. Funderburk, J. Tran, M. D. Todd, A. Netchaev, and K. J. Loh, 2022, "Active Scour Monitoring using Ultrasonic Time Domain Reflectometry of Buried Slender Sensors," Smart Materials and Structures (0964-1726), IOP, 31: 015045.

S. Li, Y. Shu, Y-A. Lin, Y. Zhao, Y-J. Yeh, W-H. Chiang, and K. J. Loh, 2022, “Distributed Strain Monitoring using Nanocomposite Paint Sensing Meshes,” Sensors (1424-8220), MDPI, 22, 812. DOI: 10.3390/s22030812 

E. Guerra-Bravo, H-J. Lee, A. Baltazar, and K. J. Loh, 2021, “Vibration Analysis of a Piezoelectric Ultrasonic Atomizer to Control Atomization Rate,” Applied Sciences (2076-3417), MDPI, 11: 8350. DOI: 10.3390/app11188350 

H-J. Lee, E. Guerra-Bravo, A. Baltazar, and K. J. Loh, 2021, "Atomization Control to Improve Soft Actuation through Vaporization," Frontiers in Robotics and AI (2296-9144), Frontiers, 8: 747440. DOI: 10.3389/frobt.2021.747440

S. Gupta, Y-A. Lin, H-J. Lee, R. Wu, J. P. Lynch, N. Garg, and K. J. Loh, 2021, “In Situ Crack Mapping of Large-Scale Self-Sensing Concrete Pavements using Electrical Resistance Tomography,” Cement and Concrete Composites (0958-9465), Elsevier, 122: 104154/1-14. DOI: 10.1016/j.cemconcomp.2021.104154 

H-J. Lee and K. J. Loh, 2021, “Liquid Vaporization Actuated Soft Structures with Active Cooling and Heat Loss Control,” Smart Materials and Structures (0964-1726), IOP, 30: 055007/1-9. DOI: 10.1088/1361-665X/abeefb

Y-A. Lin, m.c. schraefl, W-H. Chiang, and K. J. Loh, 2021, “Wearable Nanocomposite Kinesiology Tape for Monitoring Muscle Engagement,” MRS Advances (2059-8521), Springer, 6(1): 6-13. DOI: 10.1557/s43580-021-00005-4

Y-A. Lin, Y. Zhao, L. Wang, Y. Park, Y-J. Yeh, W-H. Chiang, and K. J. Loh, 2021, "Graphene K-Tape Meshes for Densely Distributed Human Motion Monitoring," Advanced Materials Technologies (2365-709X), Wiley, 6(1): 2000861. DOI: 10.1002/admt.2020000861

S. Gupta, H. Kim, H. Kim, and K. J. Loh, 2021, “Planar Capacitive Imaging for Composite Delamination Damage Characterization,” Measurement Science and Technology (1361-650), IOP, 32: 024010. DOI: 10.1088/1361-6501/abb484

H-J. Lee, P. Prachaseree, and K. J. Loh, 2020, “Rapid Soft Material Actuation through Droplet Evaporation,” Soft Robotics (2169-5172), Mary Ann Liebert, Online Ahead of Print. DOI: 10.1089/soro.2020.0055

S. Li, C-L. Chen, and K. J. Loh, 2020, “Laboratory Evaluation of Railroad Crosslevel Tilt Sensing using Electrical Time Domain Reflectometry,” Sensors (1424-8220), MDPI, 20(16): 4470. DOI: 10.3390/s20164470 

S-K- Huang, J-D. Chen, K. J. Loh, and C-H. Loh, 2020, “Discussion of User-defined Parameters for Recursive Subspace Identification: Application to Seismic Response of Building Structures,” Earthquake Engineering and Structural Dynamics (1096-9845), Wiley, 49(15): 1738-1757. DOI: 10.1002/eqe.3327 

F. Azhari and K. J. Loh, 2020, “Warning-Time Based Framework for Bridge Scour Monitoring,” Journal of Bridge Engineering (1084-0702), ASCE, 25(7): 04020098/1-9. DOI: 10.1061/(ASCE)BE.1943-5592.0001553  

B. M. Lee, Z. Huang, and K. J. Loh, 2020, “Effect of Carbon Nanotube Alignment on Nanocomposite Sensing Performance,” Materials Research Express (2053-1591), IOP, 7(4): 046406. DOI: 10.1088/2053-1591/ab8842  

S. Gupta, K. J. Loh, and A. Pedtke, 2020, "Sensing and Actuation Technologies for Smart Socket Prostheses," Biomedical Engineering Letters (2093-9868), Springer, 1-16, 10(1): 103-118. DOI: 10.1007/s13534-019-00137-5 

H. Lee, W. Yu, K. J. Loh, and W. Chung, 2020, “Self-Heating and Electrical Performance of Carbon Nanotube-Enhanced Cement Composites,” Construction and Building Materials (0950-0618), 250: 118838. DOI: 10.1016/j.conbuildmat.2020.118838 

Y. Park and K. J. Loh, 2020, “Surface Morphing of Geometrically Patterned Active Skins,” MRS Advances (2059-8521), Cambridge Core, 5(14-15): 743-750. DOI: 10.1557/adv.2020.185 

S. Gupta, G. Vella, I-No. Yu, C-H. Loh, W-H. Chiang, and K. J. Loh, 2020, “Graphene Sensing Meshes for Densely Distributed Strain Field Monitoring,” Structural Health Monitoring (1475-9217), Sage, 19(5): 1323-1339. DOI: 10.1177/1475921719877418  

I-N. Yu, S-K. Huang, K. J. Loh, and C-H. Loh, 2019, “Application of Subspace Identification on the Recorded Seismic Response Data of Pacoima Dam,” Structural Monitoring and Maintenance (2288-6605), Techno-Press, 6(4): 347-364 . DOI: 10.12989/smm.2019.6.4.000

B. Yao, C. Chen, and K. J. Loh, 2019, “Performance Characteristics of Diluted Epoxy Asphalt Binders and Their Potential Application in Chip Seal,” Journal of Materials in Civil Engineering (0899-1561), ASCE, 31(12): 04019290/1-9. DOI: 10.1061/(ASCE)MT.1943-5533.0002943 

J. Lee, K. J. Loh, H. S. Choi, and H. An, 2019, “Effect of Structural Change on Temperature Behavior of a Long-Span Suspension Bridge Pylon,” International Journal of Steel Structures (1598-2351), Springer, 19: 2073-2089. DOI: 10.1007/s13296-019-00279-3 

Y. Park, G. Vella, and K. J. Loh, 2019, “Bio-Inspired Active Skins for Surface Morphing,” Scientific Reports (2045-2322), Nature, 9(18609): 1-10. DOI: 10.1038/s41598-019-55163-1 

C. Dhong, R. Miller, N. B. Root, S. Gupta, L. V. Kayser, C. W. Carpenter, K. J. Loh, V. S. Ramachandran, and D. J. Lipomi, 2019, “Role of Indentation Depth and Contact Area on Human Perception of Softness for Haptic Interfaces,” Science Advances (2375-2548), AAAS, 5, eaaw8845. DOI: 10.1126/sciadv.aaw8845 

Y. Zhang, X. Sun, K. J. Loh, W. Su, Z. Xue, and X. Zhao, 2019, “Autonomous Bolt Loosening Detection using Deep Learning,” Structural Health Monitoring (1475-9217), Sage. DOI: 10.1177/1475921719837509 

M. Funderburk, S-K. Huang, C-H. Loh, and K. J. Loh, 2019, “Densely Distributed and Real-time Scour Hole Monitoring using Piezoelectric Rod Sensors,” Advances in Structural Engineering (1369-4332), Sage, 22(16): 3395-3411. DOI: 10.1177/1369433219831124 

K. Manna, L. Wang, K. J. Loh, and W-H. Chiang, 2019, "Printed Strain Sensors Using Graphene Nanosheets Prepared by Water-Assisted Liquid Phase Exfoliation,” Advanced Materials Interfaces (2196-7350), Wiley, 1900034. DOI: 10.1002/admi.201900034 :: Article featured on Back Cover

H-J. Lee and K. J. Loh, 2019, “Soft Material Actuation by Atomization,” Smart Materials and Structures (0964-1726), IOP, 28(2), 025030. DOI: 10.1088/1361-665X/aaf5a1

J. A. Jackson, M. C. Messner, N. A. Dudukovic, W. L. Smith, L. Bekker, B. Moran, A. M. Golobic, A. J. Pascall, E. B. Duoss, K. J. Loh, and C. M. Spadaccini, 2018, "Field Responsive Mechanical Metamaterials," Science Advances (2375-2548), AAAS, 4, eaau6419. DOI: 10.1126/sciadv.aau6419 :: Front Cover Picture :: This work is featured by IEEE Spectrum.

B. M. Lee, K. J. Loh, and F. Lanza di Scalea, 2018, "Distributed Strain Sensing using Electrical Time Domain Reflectometry with Nanocomposites," IEEE Sensors (1530-437X), IEEE, 18(23): 9515-9525. DOI: 10.1109/JSEN.2018.2872910

S. Gupta, H-J. Lee, K. J. Loh, M. D. Todd, J. Reed, and A. D. Barnett, 2018, "Noncontact Strain Monitoring of Osseointegrated Prostheses," Sensors (1424-8220), MDPI, 18(9): 3015. DOI: 10.3390/s18093015

G. Fan, S. Gupta, and K. J. Loh, 2018, "Curing and Subsurface Damage Monitoring of Epoxy-based Composites," Structural Health Monitoring (1475-9217), Sage, Online First. DOI: 10.1177/1475921718776612 

S. Gupta and K. J. Loh, 2018, "Monitoring Osseointegrated Prosthesis Loosening and Fracture using Electrical Capacitance Tomography," Biomedical Engineering Letters (2093-9868), Springer, 8(3): 291-300. DOI: 10.1007/s13534-018-0073-4 

H. Lee, Y. M. Song, K. J. Loh, and W. Chung, 2018, "Thermal Response Characterization and Comparison of Carbon Nanotube-enhanced Cementitious Composites," Composite Structures, Elsevier, 202: 1042-1050. DOI: 10.1016/j.compstruct.2018.05.027

L. Wang, K. J. Loh, W-H. Chiang, and K. Manna, 2018, "Micro-Patterned Graphene Sensing Skins for Human Physiological Monitoring" Nanotechnology (0957-4484), IOP, 29(10): 055018/1-11. DOI: 10.1088/1361-665X/aa6849 :: This work is featured by Nanotechweb.org: Nano-ink-based sensors detect an eye blink

S. Gupta, G. Fan, and K. J. Loh, 2017, "Noninvasive Monitoring of Epoxy Curing," IEEE Sensors Letters (2475-1472), IEEE, 1(5): 1-4. DOI: 10.1009/LSENS.2017.2753581

Y. Zhao, M. Schagerl, C. Viechtbauer, and K. J. Loh, 2017, "Characterizing the Conductivity and Enhancing the Piezoresistivity of Carbon Nanotube-Polymeric Thin Films for Use as Spatial Strain Sensors," Materials (1996-1944), MDPI, 10(724): 1-11. DOI: 10.3390/ma10070724

S. Gupta and K. J. Loh, 2017, "Noncontact Electrical Permittivity Mapping and pH-Sensitive Thin Films for Osseointegrated Prosthesis and Infection Monitoring," IEEE Transactions on Medical Imaging (0278-0062), IEEE, Early Access. DOI: 10.1109/TMI.2017.2707390

S. Gupta and K. J. Loh, 2017, "Non-Contact Tomographic Imaging and Nanocomposite Films for Monitoring Human-Prosthesis Interfaces," Procedia Engineering (1877-7058), Elsevier, 188: 110-118. DOI: 10.1016/j.proeng.2017.04.464

L. Wang and K. J. Loh, 2017, "Wearable Carbon Nanotube-based Fabric Sensors for Monitoring Human Physiological Performance," Smart Materials and Structures (0964-1726), IOP, 26: 055018/1-11. DOI: 10.1088/1361-665X/aa6849

B. Lee, K. J. Loh, and Y-S. Yang, 2017, "Carbon Nanotube Thin Film Strain Sensor Models Assembled using Nano- and Micro-Scale Imaging," Computational Mechanics (0178-7675), Springer, 1-11, OnlineFirst. DOI: 10.1007/s00466-017-1391-6

B. Lee and K. J. Loh, 2017, "Carbon Nanotube Thin Film Strain Sensors: Comparison between Experimental Tests and Numerical Simulations," Nanotechnology (0957-4484), IOP, 28(15): 155502/1-14. DOI: 10.1088/1361-6528/aa6382 :: This work is featured by IOP Publishing: Highlights of 2017

F. Azhari and K. J. Loh, 2016, "Laboratory Validation of Buried Piezoelectric Scour Sensing Rods," Journal of Structural Control and Health Monitoring (1545-2263), Wiley. DOI: 10.1002/stc.1969

F. Azhari and K. J. Loh, 2016, "Dissolved Oxygen Sensors for Scour Monitoring," IEEE Sensors (1530-437X), IEEE, 16(23): 8357-8358. DOI: 10.1109/JSEN.2016.2613123

C-H. Loh, K. J. Loh, Y-S. Yang, W-Y. Hsiung, and Y-T. Huang, 2016, "Vibration-based System Identification and Damage Detection of Wind Turbine Blades," Journal of Structural Control and Health Monitoring (1545-2263), Wiley, Online. DOI: 10.1002/stc.1876

W. Lestari, B. Pinto, V. La Saponara, J. Yasui, and K. J. Loh, 2016, "Sensing Uniaxial Tensile Damage in Fiber-Reinforced Polymer Composites using Electrical Resistance Tomography," Smart Materials and Structures (0964-1726), IOP, 25(8): 085016/1-8. DOI: 10.1068/0964-1726/25/8/085016

L. Wang, S. Gupta, K. J. Loh, and H. S. Koo, 2016, "Distributed Pressure Sensing using Carbon Nanotube Fabrics," IEEE Sensors (1530-437X), IEEE, 16(12): 4663-4664. DOI: 10.1109/JSEN.2016.2553045

J. G. Gonzalez, S. Gupta, and K. J. Loh, 2016, “Multifunctional Cement Composites Enhanced with Carbon Nanotube Thin Film Interfaces,” Proceedings of the IEEE (0018-0219), IEEE, 104(8): 1547-1560. DOI: 10.1109/JPROC.2015.2503299

S. Gupta, J. G. Gonzalez, and K. J. Loh, 2016, "Self-Sensing Concrete Enabled by Nano-Engineered Cement Aggregate Interfaces," Structural Health Monitoring (1475-9217), Sage, 1-15. DOI: 10.1177/1475921716643867

L. Wang, K. J. Loh, L. Brely, F. Bosia, and N. M. Pugno, 2016 “An Experimental and Numerical Study on the Mechanical Properties of Carbon Nanotube-Latex Thin Films,” Journal of the European Ceramics Society (0955-2219), Elsevier, 36(9): 2255-2262. DOI: 10.1016/j.jeurceramsoc.2015.12.052

C-H. Loh, Y-T. Huang, W-Y. Hsiung, Y-S. Yang, and K. J. Loh, 2015, “Vibration-based Identification of Rotating Blades using Rodrigues’ Rotation Formula from a 3-D Measurement,” Wind & Structures (1226-6116), Techno-Press, 21(6): 677-691. DOI: 10.12989/was.2015.21.6.677

L. Wang and K. J. Loh, 2015, “Spray-coated Carbon Nanotube-Latex Strain Sensors,” Science Letters Journal (2278-3393), Cognizure, 5(234): 1-10.

B. Pinto, S. Kern, J. J. Ku-Herrera, J. Yasui, V. La Saponara, and K. J. Loh, 2015, “A Comparative Study of a Self-monitoring CNT Film and Carbon Fibers under Flexural Loading by Electrical Resistance Changes,” Journal of Physics: Conference Series (1742-6596), IOP, 628(012098): 1-7. DOI: 10.1088/1742-6596/628/1/012098

K. J. Loh and J. Gonzalez, 2015, “Cementitious Composites Engineered with Embedded Carbon Nanotube Thin Films for Enhanced Sensing Performance,” Journal of Physics: Conference Series (1742-6596), IOP, 628(012042): 1-8. DOI: 10.1088/1742-6596/628/1/012042

E. Rojas, A. Baltazar, and K. J. Loh, 2015, “Damage Detection using the Signal Entropy of an Ultrasonic Sensor Network,” Smart Materials and Structures (0964-1726), IOP, 24(7), 075008: 1-11. DOI: 10.1088/0964-1726/24/7/075008

F. Azhari, P. Scheel, and K. J. Loh, 2015, “Monitoring Bridge Scour using Dissolved Oxygen Probes,” Structural Monitoring and Maintenance (2288-6605), Techno-Press, 2(2): 145-164. DOI: http://dx.doi.org/10.12989/smm.2015.2.2.145

B. M. Lee and K. J. Loh, 2015, “A 2D Percolation-based Model for Characterizing the Piezoresistivity of Carbon Nanotube-based Films,” Journal of Materials Science (0022-2461), Springer, 50(7): 2973-2983. DOI: 10.1007/s10853-015-8862-y

D. Ryu, F. N. Meyers, and K. J. Loh, 2015, “Inkjet-printed, Flexible, and Photoactive Thin Film Strain Sensors,” Journal of Intelligent Material Systems and Structures (1045-389X), Sage, 26(13): 1699-1710. DOI: 10.1177/1045389X14546653

K. J. Loh, C. Tom, J. Benassini, and F. Bombardelli, 2014, “A Distributed Piezo-polymer Scour Net for Bridge Scour Hole Topography Monitoring,” Structural Monitoring and Maintenance (2288-6605), Techno-Press, 1(2): 183-195. DOI: 10.12989/smm.2014.1.2.183

D. Ryu and K. J. Loh, 2014, “Multi-modal Sensing using Photoactive Thin Films,” Smart Materials and Structures (0964-1726), IOP, 23(8), 085011: 1-16. DOI: 10.1088/0964-1726/23/8/085011

J. S. Dodds, F. N. Meyers, and K. J. Loh, 2013, “Piezoelectric Nanocomposite Sensors Assembled using Zinc Oxide Nanoparticles and Poly(vinylidene fluoride),” Smart Structures and Systems (1738-1584), Techno-Press, 12(1): 55-72. DOI: 10.12989/sss.2013.12.1.055

D. Ryu and K. J. Loh, 2013, “Analyzing the Strain Sensing Response of Photoactive Thin Films using Absorption Spectroscopy,” Key Engineering Materials Journal (1013-9826), Trans Tech, 569-570: 695-701. DOI: 10.4028/www.scientific.net/KEM.569-570.695

L. P. Mortensen, D. Ryu, Y. Zhao, and K. J. Loh, 2013, “Rapid Assembly of Multifunctional Thin Film Sensors for Wind Turbine Blade Monitoring,” Key Engineering Materials Journal (1013-9826), Trans Tech, 569-570: 515-522. DOI: 10.4028/www.scientific.net/KEM.569-570.515 (DAMAS Best Paper Award)

B. R. Loyola, V. La Saponara, K. J. Loh, T. M. Briggs, G. O’Bryan, and J. L. Skinner, 2013, “Spatial Sensing using Electrical Impedance Tomography,” IEEE Sensors (1530-437X), IEEE, 13(6): 2357-2367. DOI: 10.1109/JSEN.2013.2253456

B. R. Loyola, T. M. Briggs, L. Arronche, K. J. Loh, V. La Saponara, G. O’Bryan, and J. L. Skinner, 2013, “Detection of Spatially Distributed Damage in Fiber-Reinforced Polymer Composites,” Structural Health Monitoring (1475-9217), Sage, 12(3): 225-240. DOI: 10.1177/1475921713479642

F. N. Meyers, K. J. Loh, J. S. Dodds, and A. Baltazar, 2013, “Active Sensing and Damage Detection using Piezoelectric Zinc Oxide-based Nanocomposites,” Nanotechnology (0957-4484), IOP, 24(185501): 1-10. DOI: 10.1088/0957-4484/24/18/185501

B. R. Loyola, Y. Zhao, K. J. Loh, and V. La Saponara, 2013, “The Electrical Response of Carbon Nanotube-based Thin Films Subjected to Mechanical and Environmental Effects,” Smart Materials and Structures (0964-1726), IOP, 22(025010): 1-11. DOI: 10.1088/0964-1726/22/2/025010

K. J. Loh and F. Azhari, 2012, “Recent Advances in Skin-inspired Sensors Enabled by Nanotechnology,” Journal of Materials (1047-4838), Springer, 64(7): 793-801. DOI: 10.1007/s11837-012-0358-5

A. Vandenberg and K. J. Loh, 2012, “Evaluating the pH Sensitivity of Carbon Nanotube-Polyaniline Thin Films with Different Dopants,” Nano LIFE (1793-9844), World Scientific, 2(4): 1242001/1-12. DOI: 10.1142/S1793984412420019

D. Ryu and K. J. Loh, 2012, “Strain Sensing using Photocurrent Generated by Photoactive P3HT-based Nanocomposites,” Smart Materials and Structures (0964-1726), IOP, 21(065017): 1-9. DOI: 10.1088/0964-1726/21/6/065017 (ASME ASMS Best Paper Award)

J. S. Dodds, F. N. Meyers, and K. J. Loh, 2012, “Piezoelectric Characterization of PVDF-TrFE Thin Films Enhanced with ZnO Nanoparticles,” IEEE Sensors (1530-437X), IEEE, 12(6): 1889-1890. DOI: 10.1109/JSEN.2011.2182043

D. Ryu, K. J. Loh, R. Ireland, M. Karimzada, F. Yaghmaie, and A. M. Gusman, 2011, “In Situ Reduction of Gold Nanoparticles in PDMS Matrices and Applications for Large Strain Sensing,” Smart Structures and Systems (1738-1584), Techno-Press, 8(5): 471-486.

S. Pyo, K. J. Loh, T-C. Hou, E. Jarva, and J. P. Lynch, 2011, “A Wireless Impedance Analyzer for Automated Tomographic Mapping of a Nanoengineered Sensing Skin,” Smart Structures and Systems (1738-1584), Techno-Press, 8(1): 137-155.

Y. Zhao, B. R. Loyola, and K. J. Loh, 2011, “Characterizing the Viscoelastic Properties of Layer-by-Layer Carbon Nanotube-Polyelectrolyte Thin Films,” Smart Materials and Structures (0964-1726), IOP, 20(7): 075020/1-11. DOI: 10.1088/0964-1726/20/7/075020

K. J. Loh and D. Chang, 2011, “Zinc Oxide Nanoparticle-Polymeric Thin Films for Dynamic Strain Sensing,” Journal of Materials Science (0022-2461), Springer, 46(1): 228-237. DOI: 10.1007/s10853-010-4940-3 

B. R. Loyola, V. La Saponara, and K. J. Loh, 2010, “In Situ Strain Monitoring of Fiber-Reinforced Polymers using Embedded Piezoresistive Nanocomposites,” Journal of Materials Science (0022-2461), Springer, 45(24): 6786-6798. DOI: 10.1007/s10853-010-4775-y

K. Wille and K. J. Loh, 2010, “Nano-Engineering Ultra-High Performance Concrete with Multi-Walled Carbon Nanotubes,” Transportation Research Record: Journal of the Transportation Research Board (0361-1981), National Research Council, 2142: 119-126.

K. J. Loh, T-C. Hou, J. P. Lynch, and N. A. Kotov, 2009, “Carbon Nanotube Sensing Skins for Spatial Strain and Impact Damage Identification,” Journal of Nondestructive Evaluation (0195-9298), Springer, 28(1): 9-25. DOI: 10.1007/s10921-009-0043-y

K. J. Loh, J. P. Lynch, and N. A. Kotov, 2008, “Passive Wireless Sensing Using Multifunctional Carbon Nanotube Composite Thin Film Patches,” International Journal of Applied Electromagnetics and Mechanics (1383-5416), IOS Press, 28(1-2): 87-94.

K. J. Loh, J. P. Lynch, and N. A. Kotov, 2008, “Inductively Coupled Nanocomposite Wireless Strain and pH Sensors,” Smart Structures and Systems (1738-1584), Techno-Press, 4(5): 531-548.

K. J. Loh, J. P. Lynch, B. S. Shim, and N. A. Kotov, 2008, “Tailoring Piezoresistive Sensitivity of Multilayer Carbon Nanotube Composite Sensors,” Journal of Intelligent Material Systems and Structures (1045-389X), Sage, 19(7): 747-764. DOI: 10.1177/1045389X07079872

T-C. Hou, K. J. Loh, and J. P. Lynch, 2007, “Spatial Conductivity Mapping of Carbon Nanotube Composite Thin Films by Electrical Impedance Tomography for Sensing Applications,” Nanotechnology (0957-4484), IOP, 18(31): 315501/1-9. DOI: 10.1088/0957-4484/18/31/315501

K. J. Loh, J. Kim, J. P. Lynch, N. W. S. Kam, and N. A. Kotov, 2007, “Multifunctional Layer-by-Layer Carbon Nanotube-Polyelectrolyte Thin Films for Strain and Corrosion Sensing,” Smart Materials and Structures (0964-1726), IOP, 16(2): 429-438. DOI: 10.1088/0964-1726/16/2/022

J. P. Lynch, Y. Wang, K. J. Loh, J-H. Yi, and C-B. Yun, 2006, “Performance Monitoring of the Geumdang Bridge using a Dense Network of High-Resolution Wireless Sensors,” Smart Materials and Structures (0964-1726), IOP, 15(6): 1561-1575. DOI: 10.1088/0964-1726/15/6/008

J. P. Lynch and K. J. Loh, 2006, “A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring,” Shock and Vibration Digest (1070-9622), Sage, 38(2): 91-128. DOI: 10.1177/058310240606149

S-C. Huang, Y-A. Lin, T. Pierce, E. Wyckoff, and K. J. Loh, “Measuring the Golf Swing Pattern using Motion Tape for Feedback and Fault Detection,” Proceedings of the 14th International Workshop on Structural Health Monitoring, Stanford, CA, September 12-14, 2023. 

V. Naidu, Y. Park, and K. J. Loh, “Temperature-Responsive and Passive Wireless Mechanical Metamaterial Sensors,” Proceedings of the 14th International Workshop on Structural Health Monitoring, Stanford, CA, September 12-14, 2023. 

T. Pierce, Y-A. Lin, and K. J. Loh, “Wireless Gait and Respiration Monitoring using Nanocomposite Sensors,” Proceedings of the 14th International Workshop on Structural Health Monitoring, Stanford, CA, September 12-14, 2023. 

A. Appelle, Y-A. Lin, E. Noble, L. Salvino, K. J. Loh, and J. P. Lynch, “Wearable Sensor Platform to Monitor Physical Exertion using Graphene Motion Tape,” Proceedings of the 9th European Workshop on Structural Health Monitoring, Palermo, Italy, July 4-7, 2022. 

K. J. Loh, S-C. Huang, and Y-A. Lin, “Enhancing Warfighter Marksmanship Performance using Motion Tape Elastic Fabric Sensors,” 2022 Interservice/Industry Training, Simulation, and Education Conference (I/ITSEC), Orlando, FL, November 28-December 2, 2022. 

Y-A. Lin and K. J. Loh, “Tactical Athlete Training and Performance Monitoring using Motion Tape Wearable Sensors,” Materials Research Proceedings – Structural Health Monitoring, The 9th Asia-Pacific Workshop on Structural Health Monitoring, Cairns, Australia, December 6-8, 2022, Vol. 27, 292-299 (2023). DOI: 10.21741/9781644902455-38  

A. Appelle, L. Salvino, Y-A. Lin, T. Pierce, E. Noble, G. Draughon, K. J. Loh, and J. P. Lynch, “Integration of Wearable and Ambient Sensors towards Characterization of Physical Effort,” Materials Research Proceedings – Structural Health Monitoring, The 9th Asia-Pacific Workshop on Structural Health Monitoring, Cairns, Australia, December 6-8, 2022, Vol. 27, 300-307 (2023). DOI: 10.21741/9781644902455-39 

Y-A. Lin, X. Zhao, S-C. Huang, and K. J. Loh, “Nanocomposite Motion Tape for Distributed Skin-Strain, Muscle Engagement, and Movement Assessment,” TechConnect World Innovation Conference & Expo, Washington, DC, October 18-20, 2021. 

Y-A. Lin, X. Zhao, A. Silder, P. Sessoms, J. J. Fraser, and K. J. Loh, “Graphene Kinesiology Tape for Monitoring Distributed Human Movements of the Ankle-Foot Complex,” SPIE Symposium on Smart Structures and Materials + Nondestructive Evaluation, Virtual, March 22-26, 2021. 

Y. Park and K. J. Loh, “Controlling 3D Deformations of Bio-Inspired Active Skins through Designed Geometrical Imperfections ,” SPIE Symposium on Smart Structures and Materials + Nondestructive Evaluation, Virtual, March 22-26, 2021. 

M. Funderburk, M. D. Todd, A. Netchaev, and K. J. Loh, “Active Scour Monitoring using Ultrasonic Time-Domain Reflectometry to Detect a Soil Interface,” SPIE Symposium on Smart Structures and Materials + Nondestructive Evaluation, Virtual, March 22-26, 2021. 

S. Li, Y-A. Lin, and K. J. Loh, “Pressure Mapping using a Nanocomposite Smartfoam and Electrical Impedance Tomography,” SPIE Symposium on Smart Structures and Materials + Nondestructive Evaluation, Virtual, March 22-26, 2021. 

H-J. Lee and K. J. Loh, “Characterization of Soft Actuation through Ultrasonic Atomization,” TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, Springer, San Diego, CA, 881-888. 

Y. Park and K. J. Loh, “Active Metamaterial Skins for Friction Coefficient Control,” TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, Springer, San Diego, CA, 889-895. 

G. Vella, S. Gupta, K. J. Loh, and A. Netchaev, “Large-Area Distributed Strain Monitoring using Patterned Nanocomposite Sensing Meshes,” Proceedings of SPIE – 26th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, March 3-7, 2019. 

L. Wang, G. Vella, and K. J. Loh, “Topological Design of Carbon Nanotube-based Nanocomposites for Strain Sensing,” Proceedings of SPIE – 26th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, March 3-7, 2019. 

S. Gupta, T. Zhang, and K. J. Loh, “Enhancing the Imaging Performance of Electrical Capacitance Tomography for Monitoring Osseointegrated Prostheses,” Proceedings of SPIE – 26th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, March 3-7, 2019. 

Y. Park, G. Vella, and K. J. Loh, “Active Metamaterial Skins for Actuation and Gripping,” Proceedings of the 14th International Workshop on Advanced Smart Materials and Smart Structures Technology (ANCRiSST), Rome, Italy, July 19-20, 2019. 

Y-A. Lin, A. Pedtke, and K. J. Loh, “Smart Kinesiology Tape for Human Physiological Monitoring,” Proceedings of the 14th International Workshop on Advanced Smart Materials and Smart Structures Technology (ANCRiSST), Rome, Italy, July 19-20, 2019. 

S. Gupta, G. Vella, W-H. Chiang, and K. J. Loh, “Graphene Sensing Mesh for Distributed Strain Field Monitoring,” Proceedings of the 14th International Workshop on Advanced Smart Materials and Smart Structures Technology (ANCRiSST), Rome, Italy, July 19-20, 2019. 

Y-A. Lin, S. Gupta, A. Pedtke, and K. J. Loh, “Monitoring Pressure Distributions at Human-Socket Prostheses Interfaces using Graphene-Fabric Sensors,” Proceedings of the 12th International Workshop on Structural Health Monitoring, Stanford, CA, September 10-12, 2019. 

H-J. Lee, N. Melchor, and K. J. Loh, “Soft Material Actuation and Shape-Change through Ultrasonic Atomization,” Proceedings of the 12th International Workshop on Structural Health Monitoring, Stanford, CA, September 10-12, 2019. 

S. Gupta, H. Kim, H-J. Lee, H. Kim, and K. J. Loh, “Planar Array Capacitive Imaging for Characterizing Subsurface Composite Damage,” Proceedings of the 12th International Workshop on Structural Health Monitoring, Stanford, CA, September 10-12, 2019. 

L. Wang, G. Vella, W-H. Chiang, and K. J. Loh, “Topological Design and Characterization of Piezoresistive Nanocomposites,” Proceedings of the 12th International Workshop on Structural Health Monitoring, Stanford, CA, September 10-12, 2019. (IWSHM Best Paper Award)

H. J. Lee, M. Funderburk, and K. J. Loh, "Actuation of Soft Materials through Ultrasonic Atomization," Proceedings of SPIE - 25th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, March 4-8, 2018.

X. Zhao, R. Han, K. J. Loh, B. Xie, J. Lie, and J. Ou, "Shaking Table Tests for Evaluating the Damage Features under Earthquake Excitations using Smartphones," Proceedings of SPIE - 25th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, March 4-8, 2018.

S. Gupta and K. J. Loh, "A Planar Array Capacitive Imaging System for Detecting Damage in Composite Structures," Proceedings of SPIE - 25th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Denver, CO, March 4-8, 2018.

L. Wang and K. J. Loh, “Nanocomposite Fabric Sensors for Socket Prostheses and Pressure Ulcer Prevention,” Proceedings of the 7th World Conference on Structural Control and Monitoring, Qingdao, China, July 22-25, 2018. 

B. M. Lee, K. J. Loh, and F. Lanza di Scalea, “Distributed Strain Sensing using Carbon Nanotube Thin Films and Electrical Time-Domain Reflectometry,’ Proceedings of the ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), San Antonio, TX, September 10-12, 2018. 

K. Loh, S. Shivakumar, S. Gupta, and X. Qiu, “Subsurface Concrete Rebar Corrosion Damage Localization using Nanocomposite Coatings and Noncontact Tomography,” Sixth International Symposium on Nanotechnology in Construction, Sha Tin, Hong Kong, December 2-4, 2018. 

L. Wang, K. J. Loh, R. Mousacohen, and W-H. Chiang, "Printed Graphene-based Strain Sensors for Structural Health Monitoring," Proceedings of the ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Snowbird, UT, September 18-20, 2017.

S. Gupta, G. Fan, and K. J. Loh, "Noncontact Epoxy Curing Monitoring and Subsurface Damage Detection," Proceedings of the 11th International Workshop on Structural Health Monitoring, Stanford, CA, September 12-14, 2017.

S. Gupta and K. J. Loh, "Noncontact and Noninvasive Strain Monitoring of Osseointegrated Prostheses," Proceedings of the 11th International Workshop on Structural Health Monitoring, Stanford, CA, September 12-14, 2017.

S. Gupta and K. J. Loh, "Noncontact Tomography and a pH-Sensitive Nanocomposite for Monitoring Osseointegrated Prosthesis Interfaces," Proceedings of SPIE - 24th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Portland, OR, March 25-29, 2017.

Y. Zhao, L. Wang, S. Gupta, K. J. Loh, and M. Schagerl, "Comparison of Electrical Impedance Tomography Inverse Solver Approaches for Damage Sensing," Proceedings of SPIE - 24th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Portland, OR, March 25-29, 2017.

R. Han, K. J. Loh, X. Zhao, and Y. Yu, "Research on Multi-Parameter Monitoring of Steel Frame Shaking-Table Test using Smartphone," Proceedings of SPIE - 24th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Portland, OR, March 25-29, 2017.

S. Gupta and K. J. Loh, "Non-Contact Tomographic Imaging and Nanocomposite Films for Monitoring Human-Prosthesis Interfaces," Proceedings of the 6th Asia-Pacific Workshop on Structural Health Monitoring, Hobart, Tasmania, Australia, December 7-9, 2016.

S. Gupta and K. J. Loh, "Numerical Simulations of Railroad Track Damage Characterization using Non-Contact Tomography," Proceedings of the First International Workshop on Structural Health Monitoring for Railway Systems, Qingdao, China, October 12-14, 2016.

S. Gupta and K. J. Loh, "Characterization and Localization of Sub-Surface Structural Features using Non-Contact Tomography," Proceedings of the ASME 2016 Smart Materials, Adaptive Structures, and Intelligent Systems (SMASIS) Conference, Stowe, VT, September 28-30, 2016.

L. Wang, S. Gupta, K. J. Loh, and H. S. Koo, "Nanocomposite Fabric Sensors for Monitoring Inflatable and Deployable Space Structures," Proceedings of the ASME 2016 Smart Materials, Adaptive Structures, and Intelligent Systems (SMASIS) Conference, Stowe, VT, September 28-30, 2016.

L. Wang, K. J. Loh, and W-H. Chiang, "Design of Multifunctional Graphene-Paper Strain Sensors," Proceedings of the 8th European Workshop on Structural Health Monitoring, Bilbao, Spain, July 5-8, 2016.

L. Wang, K. J. Loh, and H. S. Koo, "Sensing Human Physiological Response using Wearable Carbon Nanotube-based Fabrics," Proceedings of SPIE - 23rd Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Las Vegas, NV, March 20-24, 2016.

F. Azhari and K. J. Loh, “Introducing Two Sensing Schemes for Bridge Scour Monitoring,” Proceedings of the Transportation Research Board 95th Annual Meeting, Washington, DC, January 10-14, 2016. 

J. Gonzalez, S. Gupta, K. J. Loh, R. Wu, and N. Garg, “Nano-Engineered Cementitious Composites and Electrical Impedance Tomography for Spatial Damage Detection,” Proceedings of the Transportation Research Board 95th Annual Meeting, Washington, DC, January 10-14, 2016. 

B. M. Lee, L. Wang, and K. J. Loh, “Characterization of Carbon Nanotube Strain Sensors using Experimental Tests and Percolation Modeling,” Proceedings of the 10th International Workshop on Structural Health Monitoring, Stanford, CA, September 1-3, 2015. 

S. Gupta, J. Gonzalez, and K. J. Loh, “Damage Detection using Smart Concrete Engineered with Nanocomposite Cement-Aggregate Interfaces,” Proceedings of the 10th International Workshop on Structural Health Monitoring, Stanford, CA, September 1-3, 2015. 

F. Azhari, K. J. Loh, and F. A. Bombardelli, “Laboratory Validation of a Piezoelectric Scour Monitoring Sensor,” Proceedings of the 10th International Workshop on Structural Health Monitoring, Stanford, CA, September 1-3, 2015. 

L. Wang, K. J. Loh, and H. S. Koo, “Wearable Carbon Nanotube Fabric Sensors for Strain and Temperature Monitoring,” Proceedings of the 11th International Workshop on Advanced Smart Materials and Smart Structures Technology, Urbana, IL, August 1-2, 2015. 

Y. Zhao, C. Viechtbauer, K. J. Loh, M. Schagerl, “Enhancing the Strain Sensitivity of Carbon Nanotube-Polymer Thin Films for Damage Detection and Structural Monitoring,” Proceedings of the 11th International Workshop on Advanced Smart Materials and Smart Structures Technology, Urbana, IL, August 1-2, 2015. 

I. Wong, K. J. Loh, R. Wu, and N. Garg, “Effects of Ultra-low Concentrations of Carbon Nanotubes on the Electromechanical Properties of Cement Paste,” Proceedings of the 5th International Symposium on Nanotechnology in Construction, Chicago, IL, May 24-26, 2015. 

S-K. Huang and K. J. Loh, “Development of a Portable Electrical Impedance Tomography Data Acquisition System for Near-real-time Spatial Sensing,” Proceedings of SPIE – 22nd Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 8-12, 2015. 

I Wong, K. J. Loh, R. Wu, and N. Garg, “Sensing Properties of Mortar Incorporating Ultra-Low Concentrations of Carbon-based Conductive Additives,” Proceedings of the 5th Asia-Pacific Workshop on Structural Health Monitoring Conference, Shenzhen, China, December 4-5, 2014. 

D. Ryu, F. N. Meyers, and K. J. Loh, “Multi-modal Self-sensing Structural Coatings with Patterned Electrodes,” Proceedings of the 6th World Conference on Structural Control and Monitoring, Barcelona, Spain, July 15-17, 2014. 

Y-T. Huang, W-Y. Hsiung, C-H. Loh, Y-S. Yang, and K. J. Loh, “Time-Frequency and Image Analysis of Rotating Blades in Small-scale Wind Turbines,” Proceedings of the 6th World Conference on Structural Control and Monitoring, Barcelona, Spain, July 15-17, 2014. 

B. M. Lee, K. J. Loh, and B. R. Loyola, “Modeling the Electromechanical Properties of Carbon Nanotube-based Nanocomposites,” Proceedings of SPIE – 21st Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 9-13, 2014. 

A. Velazquez, R. A. Swartz, K. J. Loh, Y. Zhao, V. La Saponara, R. J. Kamisky, and C. P. van Dam, “Operational Model Updating of Spinning Finite Element Models for HAWT Blades,” Proceedings of SPIE – 21st Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 9-13, 2014. 

F. Azhari, J. Benassini, C. Tom, K. J. Loh, and F. A. Bombardelli, “Design and Characterization of a Piezoelectric Sensor for Monitoring Scour Hole Evolution,” Proceedings of SPIE – 21st Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 9-13, 2014. 

D. Ryu and K. J. Loh, “Photoactive and Self-sensing P3HT-based Thin Films for Strain and Corrosion Monitoring,” Proceedings of SPIE – 21st Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 9-13, 2014. 

M. T. Riosbass, K. J. Loh, G. O’Bryan, and B. R. Loyola, “In Situ Phase Change Characterization of PVDF Thin Films using Raman Spectroscopy,” Proceedings of SPIE – 21st Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 9-13, 2014. 

W-Y. Hsiung, Y-T. Huang, C-H. Loh, K. J. Loh, R. J. Kamisky, D. Nip, and C. P. van Dam, “Analyzing the Dynamic Response of Rotating Blades in Small-scale Wind Turbines,” Proceedings of SPIE – 21st Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 9-13, 2014. 

B. R. Loyola, L. Arronche, M. LaFord, V. La Saponara, and K. J. Loh, “Evaluation of the Damage Detection Characteristics of Electrical Impedance Tomography,” Proceedings of the ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, September 16-18, 2013. 

D. Ryu and K. J. Loh, “Characterizing the Self-sensing Properties of Photoactive P3HT-based Nanocomposites,” Proceedings of the 9th International Workshop on Structural Health Monitoring, Stanford, CA, September 10-12, 2013. (Best Student Paper Award) 

B. R. Loyola, K. J. Loh, V. La Saponara, J. C. Chen, and T. M. Briggs, “Comparative Study of Non-destructive Damage Evaluation Methodologies for CFRP Low Velocity Impact Damage,” Proceedings of SAMPE TECH 2012, Charleston, SC, October 22-25, 2012. 

D. Ryu and K. J. Loh, “Self-Sensing Photoactive Thin Films for Monitoring Space Structures,” Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, September 19-21, 2012. 

B. R. Loyola, L. Arronche, V. La Saponara, and K. J. Loh, “Conductivity-based Damage Detection in Carbon Fiber Composites,” Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, September 19-21, 2012. 

J. S. Dodds, F. N. Meyers, and K. J. Loh, “Enhancing the Piezoelectric Performance of PVDF-TrFE Thin Films using Zinc Oxide Nanoparticles,” Proceedings of SPIE – 19th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 11-15, 2012. (Third Place, Best Student Paper Competition) 

R. Ireland, D. Ryu, M. Karimzada, K. J. Loh, A. Gusman, and F. Yaghmaie, “Multifunctional Strain and Chemical Sensing using Gold Nanoparticle-based Polymer Composites,” Proceedings of the 2011 International Conference on Smart Structures and Systems, Seoul, South Korea, September 18-22, 2011. 

D. Ryu and K. J. Loh, “A Bio-Inspired Nanocomposite for Photocurrent-based Strain Sensing,” Proceedings of the 8th International Workshop on Structural Health Monitoring, Stanford, CA, September 13-15, 2011. 

K. J. Loh and Y. Zhao, “The Time-Varying Mechanical and Piezoresistive Response of Carbon Nanotube-based Strain Sensors,” Proceedings of the 6th International Workshop on Advanced Smart Materials and Smart Structures Technology (ANCRiSST 2011), Dalian, China, July 25-26, 2011. 

D. Ryu, K. J. Loh, and F. Yaghmaie, “Validation of Photocurrent-based Strain Sensing using a P3HT-based Nanocomposite,” Proceedings of SPIE – 18th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 6-10, 2011. 

B. R. Loyola, K. J. Loh, and V. La Saponara, “Static and Dynamic Strain Monitoring of GFRP Composites using Carbon Nanotube Thin Films,” Proceedings of SPIE – 18th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 6-10, 2011. 

D. Ryu, K. J. Loh, and F. Yaghmaie, “Towards the Development of Photosynthesis-Inspired P3HT-based Nanocomposite Sensors,” Proceedings of the 2011 NSF Engineering Research and Innovation Conference, Atlanta, GA, January 4-7, 2011. 

B. R. Loyola, K. J. Loh, and V. La Saponara, “Embedded Piezoresistive Thin Films for Monitoring GFRP Composites,” Proceedings of the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Philadelphia, PA, September 28-October 1, 2010. 

Y. Zhao and K. J. Loh, “Tuning the Mechanical Performance of Carbon Nanotube Sensing Skins via Post-Film Fabrication Thermal Annealing,” Proceedings of the 5th World Conference on Structural Control and Monitoring, Tokyo, Japan, July 12-15, 2010. 

D. Chang and K. J. Loh, “Concentration-Dependent Piezoelectricity and Strain Sensitivity of ZnO Nanoparticle-Polymeric Thin Films,” Proceedings of the 5th International Conference on Bridge Maintenance, Safety and Management, Philadelphia, PA, July 11-15, 2010. 

Y. Zhao, K. J. Loh, and D. Chang, “Piezoelectric and Mechanical Performance Characterization of ZnO-based Nanocomposites,” Proceedings of the 19th Analysis & Computation Specialty Conference, Orlando, FL, May 12-15, 2010. 

B. R. Loyola, V. La Saponara, and K. J. Loh, “Characterizing the Self-Sensing Performance of Carbon Nanotube-Enhanced Fiber-Reinforced Polymers,” Proceedings of SPIE – 17th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 7-11, 2010. 

B. I. Liea and K. J. Loh, “Passive Wireless Sensors for Monitoring Soil Particle Movement at Soil-Structure Interfaces,” Proceedings of SPIE – 17th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 7-11, 2010. 

C. H. Loh, J. P. Lynch, and K. J. Loh, “Sensing Technologies for Post-Earthquake Rapid Damage Assessment,” Proceedings of the International Conference in Commemoration of the 10th Anniversary of the 1999 Chi-Chi Earthquake, Taipei, Taiwan, September 17-21, 2009. 

K. J. Loh and D. Chang, “Piezoelectric Zinc Oxide-Polymer Nanocomposites for Sensing and Energy Harvesting,” Proceedings of the 7th International Workshop on Structural Health Monitoring, 2: 1774-1781, Stanford, CA, September 9-11, 2009. 

K. J. Loh, M. Thouless, and J. P. Lynch, “Enhancing the Mechanical and Fracture Properties of Nanocomposites Using Carbon Nanotubes,” Proceedings of the 12th International Conference on Fracture, Ottawa, ON, Canada, July 12-17, 2009. (Keynote) 

K. J. Loh, J. P. Lynch, and N. A. Kotov, “Encoding Multifunctionality within Carbon Nanotube-Polyelectrolyte Nanocomposite Architectures,” Proceedings of the NSF CMMI Research and Innovation Conference, Honolulu, HI, June 22-25, 2009. 

J. Kim, K. J. Loh, J. P. Lynch, Y. Wang, S. Cho, and C-B. Yun, “Implementation of Wireless Monitoring Systems for Modal Analysis of Bridges along a Korean Test Road,” Proceedings of the NSF CMMI Research and Innovation Conference, Honolulu, HI, June 22-25, 2009. 

J. P. Lynch, K. J. Loh, T-C. Hou, and N. A. Kotov, “Nanocomposite Sensing Skins for Distributed Structural Sensing,” Proceedings of the 3rd International Symposium on Nanotechnology in Construction, Prague, Czech Republic, May 31-June 2, 2009. 

J. P. Lynch and K. J. Loh, “Bio-Inspired Sensing Skins for Civil Infrastructure Applications,” Proceedings of the First International Workshop on Bio-Inspired Sensing and Bio-Inspired Actuation Technology, Taipei, Taiwan, April 15-17, 2009. (Keynote) 

K. J. Loh, J. G. Guest, G. Ho, J. P. Lynch, and N. G. Love, “Layer-by-Layer Carbon Nanotube Bio-Templates for In Situ Monitoring of the Metabolic Activity of Nitrifying Bacteria,” Proceedings of SPIE – 16th Annual Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, March 8-12, 2009. 

K. J. Loh and J. P. Lynch, “Multifunctional Carbon Nanotube Sensing Skins for Structural Health Monitoring,” Proceedings of the SIMO-RCES Joint Seminar on Health Monitoring of Bridges, Yamaguchi, Japan, March 5-6, 2009. (Invited Paper) 

K. J. Loh and J. P. Lynch, “Design and Validation of Carbon Nanotube Thin Film Wireless Sensors for pH and Corrosion Monitoring,” Proceedings of the ASME 2008 Conference on Smart Materials, Adaptive Structures & Intelligent Systems, Ellicott City, MD, October 28-30, 2008. 

K. J. Loh, J. Kim, J. P. Lynch, and N. A. Kotov, “Self-Sensing and Power Harvesting Carbon Nanotube-Composites based on Piezoelectric Polymers,” Proceedings of the Fourth International Conference on Bridge Maintenance, Safety, and Management, Seoul, Korea, July 13-17, 2008. 

K. J. Loh, T-C. Hou, and J. P. Lynch, “Multifunctional Sensing Skins for Structural Health Monitoring,” Proceedings of the 5th International Workshop for Structural Control and Monitoring, Dalian, China, June 5-6, 2008. 

K. J. Loh, T-C. Hou, J. P. Lynch, and N. A. Kotov, “Spatial Structural Sensing by Carbon Nanotube-based Skins,” Proceedings of SPIE – 15th Annual International Symposium on Smart Structures and Materials, San Diego, CA, March 9-13, 2008. 

J. Kim, K. J. Loh, and J. P. Lynch, “Piezoelectric Polymeric Thin Films Tuned by Carbon Nanotube Fillers,” Proceedings of SPIE – 15th Annual International Symposium on Smart Structures and Materials, San Diego, CA, March 9-13, 2008. 

K. J. Loh, J. P. Lynch, and N. A. Kotov, “Inductively-Coupled Multifunctional Carbon Nanotube-Based Nanocomposite Sensors,” Proceedings of the International Applied Electromagnetics and Mechanics Conference, East Lansing, MI, September 9-12, 2007. 

K. J. Loh, A. T. Zimmerman, and J. P. Lynch, “Wireless Monitoring Techniques for Structural Health Monitoring,” Proceedings of the International Applied Electromagnetics and Mechanics Conference, East Lansing, MI, September 9-12, 2007. 

K. J. Loh, T-C. Hou, J. P. Lynch, and N. A. Kotov, “Nanotube-based Sensing Skins for Crack Detection and Impact Damage Monitoring,” Proceedings of the 6th International Workshop on Structural Health Monitoring, Stanford, CA, September 9-11, 2007. (Best Student Paper) 

Y. Wang, K. J. Loh, J. P. Lynch, and K. H. Law, “Wireless Sensing and Control,” Proceedings of the International Conference on Smart Materials and Nanotechnology in Engineering, Harbin, China, July 1-4, 2007. 

K. J. Loh, Y. Wang, J. P. Lynch, K. H. Law, M. Fraser, and A. Elgamal, “Validation of a Wireless Traffic Monitoring System for the Voigt Bridge,” Proceedings of the World Forum on Smart Materials and Smart Structures Technology, Chongqing and Nanjing, China, May 22-27, 2007. 

K. J. Loh, J. P. Lynch, and N. A. Kotov, “Passive Wireless Strain and pH Sensing Using Carbon Nanotube-Gold Nanocomposite Thin Films,” Proceedings of SPIE – 14th Annual International Symposium on Smart Structures and Materials, San Diego, CA, March 18-22, 2007. 

T-C. Hou, K. J. Loh, and J. P. Lynch, “Electrical Impedance Tomography of Carbon Nanotube Composite Materials,” Proceedings of SPIE – 14th Annual International Symposium on Smart Structures and Materials, San Diego, CA, March 18-22, 2007. 

J. P. Lynch, K. J. Loh, and N. A. Kotov, “Electrical Impedance Analysis of Carbon Nanotube-Polyelectrolyte Thin Film Strain Sensors,” Proceedings of the US-Korea Workshop for Smart Structures Technologies for Steel Structures, November 16-17, 2006. 

Y. Wang, K. J. Loh, J. P. Lynch, M. Frasier, K. Law, and A. Elgamal, “Vibration Monitoring of the Voigt Bridge using Wired and Wireless Monitoring Systems,” Proceedings of 4th China-Japan-US Symposium on Structural Control and Monitoring, October 16-17, 2006. 

K. J. Loh, J. P. Lynch, and N. A. Kotov, “Nanoengineered Wireless Thin Film Sensors for Strain Monitoring of Structures,” Proceedings of the 4th World Conference on Structural Control and Monitoring, San Diego, CA, July 10-12, 2006. 

K. J. Loh, J. P. Lynch, and N. A. Kotov, “Mechanical-Electrical Characterization of Carbon Nanotube Thin Films for Structural Monitoring Applications,” Proceedings of SPIE – 13th Annual International Symposium on Smart Structures and Materials, San Diego, CA, February 26-March 2, 2006. 

J. P. Lynch, Yang Wang, K. Loh, J. H. Yi, and C. B. Yun, “Wireless Structural Monitoring of the Geumdang Bridge using Resolution Enhancing Signal Conditioning,” Proceedings of the IMAC XXIV Conference, St. Louis, MO, January 30-February 2, 2006. 

J. P. Lynch, K. J. Loh, T. C. Hou, Y. Wang, J. Yi, C. B. Yun, K. C. Lu, and C. H. Loh, “Validation Case Studies of Wireless Monitoring Systems in Civil Structures,” Proceedings of the Structural Health Monitoring-II Conference, Shengzhen, China, November, 2005. 

K. J. Loh, J. P. Lynch, and N. A. Kotov, “Conformable Single-Walled Carbon Nanotube Thin Film Strain Sensors for Structural Monitoring,” Proceedings of the 5th International Workshop on Structural Health Monitoring, Stanford, CA, September 12-15, 2005. 

K. Loh, M. Shinozuka, B. Mansouri, and R. Ghanem, “Structural Damage Detection and Identification Using the Synthetic Aperture Radar,” Proceedings of the 17th ASCE Engineering Mechanics Conference, Newark, DE, June 13-16, 2004. 

M. Shinozuka and K. Loh, “Remote Sensing for Urban Damage Detection,” Proceedings of SPIE – 11th Annual Smart Structures and Materials and SPIE 9th NDE for Health monitoring and Diagnostics, San Diego, CA, March 14-18, 2004. 

H-C. Chung, T. Enotomo, K. Loh, and M. Shinozuka, “Real-time Visualization of Bridge Structural Response Through Wireless MEMS Sensors,” Proceedings of SPIE – Testing, Reliability, and Application of Micro- and Nano-Material Systems II, San Diego, CA, March 14-18, 2004. 

M. Shinozuka, B. Mansouri, K. Loh, and R. Ghanem, “Synthetic Aperture Radar (SAR) Remote Sensing Damage Detection for Typical Concrete Bridges,” Proceedings of the ASCE 9th Aerospace Division International Conference on Engineering, Construction, and Operations in Challenging Environments, Houston, TX, March 7-10, 2004. 

K. Loh, M. Shinozuka, R. Ghanem, and G. Hamza, “Remote Sensing with the Synthetic Aperture Radar (SAR) for Urban Damage Detection,” Proceedings of the 1st International Workshop on Smart Materials and Structures Technology, Honolulu, HI, January 10-13, 2004. 

K. Loh, H-C. Chung, M. Shinozuka, and T. Enotomo, “Real-time Visualization of Structural Bridge Response through Wireless Sensors,” Multidisciplinary Center for Earthquake Engineering Research (MCEER) sponsored Research Experiences for Undergraduates (REU) Symposium, Bend, OR, July 2003.